Panasonic KX-TD500 Installation Manual page 226

4.5.10 Voice Mail Integration
Value Range
Parameter
(default)
Integration Codes
The following parameters (up to 3 digits for each) can be programmed using "0 through 9," "
Ringback Tone
Busy Tone
Reorder Tone
DND Tone
Extension
Answer
Extension
Disconnection
Confirmation
Tone
FWD to VM
Ringback Tone
FWD to VM
Busy Tone
FWD to
Extension
Ringback Tone
(1) Specifies the Ringback Tone code.
Sent to the VPS when the extension it dialed is ringing.
(2) Specifies the Busy Tone code.
Sent to the VPS when the extension it dialed is busy.
(3) Specifies the Reorder Tone code.
Sent to the VPS if it dials an invalid extension number, or
if it is inadvertently connected to another VPS and so on.
(4) Specifies the DND Tone code.
Sent to the VPS if the extension it dialed is in DND
mode.
(5) Specifies the Extension Answer code.
Sent to the VPS when the extension it dialed answers
the call.
(#9) Specifies the Extension Disconnect code.
Sent to the VPS when the calling party hangs up.
(9) Specifies the Confirmation Tone code.
Sent to the VPS when it successfully dials a message
waiting lamp on/off code.
(6) Specifies the FWD to VM Ringback Tone code.
Sent to the VPS if the caller is forwarded to another
VM(Voice Mail) port which is available to accept the
call.
(7) Specifies the FWD to VM Busy Tone code.
Sent to the VPS if the caller is forwarded to a VM port
which is not available to accept the call.
(8) Specifies the FWD to Extension Ringback Tone code.
Sent to the VPS if the caller is forwarded to another,
non-voice mail extension.
Description/Function
System Programming
Reference
" and "#."
4-87