Panasonic KX-TD500 Installation Manual page 174

4.2.4 System Timer
Value Range
Parameter
(default)
Call Duration 0 - 60 sec
Count Start Time
First Digit Time 5 - 120 sec
Inter Digit Time 5 - 30 sec
Intercept Time 3 - 48 rings
Call Forwarding- 1 - 12 rings
No Answer Time
Extension to CO 1 - 64 min
Line Call
Duration Time
Specifies the length of time in seconds the system is to
(0) wait after sending all dialing digits to the Central
Office before starting the call duration count.
[Note]
•
The elapsed time of the call duration is shown on a
display PT.
Specifies the maximum time allowed between the start
(10) of an outside dial tone and the first digit dialed on an
outgoing call.
If no digits are dialed until this timer expires, the
system disconnects the line.
Specifies the maximum time allowed between each
(5) digit on an outgoing call.
If no digits are dialed until this timer expires, the
system disconnects the line.
[Note]
•
This timer applies to the call until the Toll Restriction
check is completed.
Specifies the number of rings the system is to wait
(12) before activating IRNA (Intercept Routing No Answer)
feature. If an incoming CO call directed to a single
extension is not answered within this timer, IRNA
redirects the call to another pre-programmed
destination.
[Note]
•
Call forward no answer will override this timer if an
extension has enabled Call Forwarding- No Answer
Time-Out.
Specifies the number of rings before the Call
(3) Forwarding No Answer feature is activated.
If a call is not answered before the programmed
number of rings, the call is redirected to the pre-
assigned extension.
Specifies the maximum time allowed for a call with an
(10) outside party.
If an outside call is originated or answered by a
programmed extension user and the timer expires, the
call is disconnected.
[Note]
•
This timer applies to the extension user who is
restricted by COS programming "Time Limit of
Outside Calls."
Description/Function
System Programming
Reference
SMDR
(F/G)
Waiting for
Second
Dial Tone
(F/G)
Intercept
Routing
(F/G)
(U/M) p.
4-35