Starting Up The Kx-Td500 System; System Power-Up Procedure - Panasonic KX-TD500 Installation Manual

2.10

Starting Up the KX-TD500 System

2.10.1 System Power-Up Procedure

Complete and check all installation procedures before connecting the AC power sup-
ply cable (packaged separately).
1. First insert the AC power supply cable into the AC power supply cable connector on the back
of the base shelf as shown below.
2. Then insert the other end of the AC power supply cable into the AC outlet.
3. Turn on the Main Power Switch on the base shelf.
4. Turn on the power switch on the power unit of each expansion shelf.
• The power indicator on the power unit will light.
5 .Turn on the power switch on the power unit of basic shelf.
[Note]
• Each shelf may be powered down individually, without powering down the entire system.
2-72 Installation