Panasonic KX-TD500 Installation Manual page 111

2.10.2 CPU Rotary-Switch Features
(2) Starting up the system with system data programmed by Maintenance PC, or using the
saved data.
After installing the optional cards required, execute the following procedures.
START
MODE=4 or 5 Off-line Mode
SYSTEM=0
Power ON reset or Press
the RESET button
"OFF-LINE" LED flashes
Download system data
On-line Mode
MODE=0
SYSTEM=0
Press the RESET button
END
[Notes]
• System programming from Maintenance PC can be done in on-line mode.
• When "OFF-LINE" LED flashes, system start-up is completed. After this, system programming from a
Maintenance PC can be done.
Installation 2-75