Panasonic KX-TD500 Installation Manual page 185

4.2.7 System Option
Value Range
Parameter
(default)
25 Pressing DSS 1. Disconnect
key operation 2. Hold
in CO talking
26 Pressing CO 1. Disconnect
key operation 2. Hold
in CO talking
27 Message #1 - #32
Waiting
lamp pattern
28 Trunk 1. Forced
hunting 2. Loop
mode Detection
29 Card 1. µ -law
CODEC 2. A-law
30 Net 1. µ -law
CODEC 2. A-law
4-46 System Programming
If set to "Hold," the PT user engaged in a CO call can
transfer the current call to another extension simply by
(2) pressing the DSS button associated with the destination
extension.
If set to "Hold," the PT user engaged in a CO call can
hold the current call and get another CO line for making
(2) or answering purpose with a single operation.
Specifies a light pattern of the Message Lamp of an
(#20) SLT.
Specifies the trunk hunting mode.
1. Forced
(1) The system seizes a trunk line compulsorily whether
detecting loop current from the local CO or not.
2. Loop Detection
The system seizes a trunk line after detecting loop
current from the local CO.
Specifies the PCM (Pulse Code Modulation)
conversion mode of KX-T96xxx series trunk cards.
(1)
[Note]
• This setting is required only when XMX(for Mexico)
type KX-T96xxx series trunk cards are installed in
the system. In this case, select "A-law."
Specifies the type of PCM (Pulse Code Modulation)
conversion mode compatible with the Digital Network
(1) to which the system is connected.
Description/Function Reference
One-Touch
Transfer by
DSS Button
(F/G)
Automatic
Hold-Trunk
by CO Button
(F/G)