[Port Test] - Panasonic KX-TD500 Installation Manual

5.2.1 Card/Port Test (On-line diagnosis)

[Port Test]

6. Click Port Test .
• "Port Test" screen is displayed.
7. Specify the port number, or select "All."
• If you select "All," all ports on the selected card will be tested at a time.
8. Click Execute .
• After executing the test, the test result is displayed.
Example: When a DHLC card is installed in the Slot No. 103.
Description
Card
Port No.
Result
Error Indication
Error Indication
Error Message
Tone detection
circuit 1 failure
Tone detection
circuit 2 failure
HDLC failure
OHCA card not
installed
PB receiver failure
Speech path failure
5-8 Utility
Item
Display/Input Value
Card No. : Type
1-4/8/16/all
OK
NG
See the table below.
Tone detection circuit 1 is not functioning properly.
Tone detection circuit 2 is not functioning properly.
HDLC (high level data link control procedures)
controller is not functioning properly.
OHCA (Off Hook Call Announcement) Card is not
installed.
PB receiver is not functioning properly.
Speech path is abnormal.
Description
The card number and the type of the target card
to be diagnosed. (The card specified in "Card
Information" screen is displayed automatically.
The port number of the target card to be
diagnosed.
The results of diagnosis.
The details of an error.
Displayed only when Result is NG (no good).
Description Card Applied
DISA, AGC
DISA, AGC
DLC, DHLC
PLC, HLC
DISA, AGC
DLC, DHLC,
DISA, AGC