Panasonic KX-TD500 Installation Manual page 243

4.8.1 Routing Table 4.8.1 Routing Table
Used to specify trunk groups and parameters required for making TIE calls.
This table is referenced by the system to identify the trunk route, when an extension user made a TIE
call by dialing the feature number for "TIE Line Access" or "Other PBX Extension number."
The first 3 digits (except TIE Line Access Code) of the dialed number decide a routing pattern
appropriate for each call. Up to 36 routing patterns can be programmed in this table.
Value Range
Parameter
(default)
PBX Code Up to 3 digits
consisting of 0-9
Entry No.
in 8 entries
increments
(01 - 08)
Leading Dial Up to 3 digits
consisting of
0 - 9 and X
Remove Digit (s)
Additional Dial Up to 4 digits
consisting of 0-9
4-104 System Programming
Specifies ID code for your PBX.
Required when your PBX is a part of a TIE Line
(Blank) Network.
01 - 36 Specifies the entry number of Routing Table which you
are going to program.
Specifies the leading one, two or three digits of the
number for TIE calls. Used to determine the trunk
group for routing a TIE call.
(Blank)
[Note]
• "X" can be used as a wild card character which
substitues any digits in its position
0 - 4 Specifies the number of digits to be deleted from the
(0) dialed digits.
Specifies the dialing number to be added to the dialed
digits.
(Blank)
Description/Function Reference