PAN1782 Bluetooth Module
Parameter
Condition
Tx Current
8 dBm Tx only, DC/DC ON
4 dBm Tx only, DC/DC ON
0 dBm Tx only, DC/DC ON
-4 dBm Tx only, DC/DC ON
-8 dBm Tx only, DC/DC ON
-12 dBm Tx only, DC/DC ON
-16 dBm Tx only, DC/DC ON
-20 dBm Tx only, DC/DC ON
-40 dBm Tx only, DC/DC ON
4.5 Bluetooth
Parameter
Frequency
Data Rate
Number of Channels
Receive Sensitivity
Output Power
Link Budget
4.6 Access Port Protection APPROTECT
The PAN1782 with order number ENW89858A1KF supports the APPROTECT feature. A
special sequence of commands is necessary during production programming. These
commands ensure that the built-in Bluetooth Device Address is preserved when the access port
protection is enabled.
The access port protection prevents (amongst others) any access to the built-in flash memory
through the device debug port.
In factory state, the PAN1782 with order number ENW89858A1KF implementing Nordic
nRF52833 "revision 2 silicon" comes with the access port protection disabled.
Product Specification Rev. 1.0
Specification
2 402 MHz to 2 480 MHz
2 Mbps, 1 Mbps, 500 kbps, 125 kbps
40: 37 data/3 advertising (0, 12, 39)
-103 dBm (125 kbps Bluetooth LE Mode), -96 dBm (1 Mbps Bluetooth
LE Mode), -92dBm (2 Mbps Bluetooth LE Mode)
-40 dBm to +8 dBm
Up to 111 dB
4 Specification
Min.
Typ.
Max.
14.2
9.6
4.9
3.8
3.4
3.1
2.9
2.7
2.3
Page 22 of 42
Unit
mA
mA
mA
mA
mA
mA
mA
mA
mA