4.2.6 Trunk to Trunk Restriction
Used to allow or restrict the trunk-to-trunk relay function (routing a trunk call from one Trunk
Group to another) on a trunk group basis.
Refer to "TIE Lines - Alternate Routing" in the Features Guide for further information.
Value Range
Parameter
(default)
Source Trunk
Group No.
Destination
Trunk Group No.
01 - 48
1. No check
[Disallowed]
2. Check
[Allowed]
(No check)
4-40
System Programming
1 - 48
Specifies the source trunk group (the first point of
(1)
trunk-to-trunk relay) number which you are going to
program.
Specifies the destination trunk group (the second point
of trunk-to-trunk relay) number which you allow
accepting a trunk call from the source trunk group.
Description/Function
Reference
Tie Lines
(F/G)