Panasonic KX-TD500 Installation Manual page 167

4.2.2 Numbering Plan
Value Range
Parameter
(default)
58 Login / Logout 1-4 digits
consisting of
0-9, and #
59 Call Back Off
60 Walking COS
61 MODEM
Control
62 Reserved
63 Quick dial 1 1 - 4 digits
. . consisting of
. . 0 - 9,
. .
. .
. .
70 Quick dial 8
71 Reserved
72 Remote DND
73 Remote FWD
Cancel
74 Trunk Route
Control
75 UCD
Supervisor Mode
76 Tie Line Access
4-28 System Programming
Specifies the feature number for Log-in/Log-out.
(45)
˝ Specifies the feature number for canceling Automatic
(46) Callback Busy feature.
˝ Specifies the feature number for setting/canceling
(47) Walking COS feature.
˝ Specifies the feature number for External Modem
(791) Control.
Reserved for future expansion.
Specifies the feature number for Quick Dial features.
and #
(Blank)
Reserved for future expansion.
˝ Specifies the feature number for setting/cancelling the
( 74) DND (Do Not Disturb) feature for other extensions
[For Manager, Operator only].
˝ Specifies the feature number for cancelling the FWD
(722) (Call Forwarding) feature assigned on other extensions
temporarily [For Manager, Operator only].
˝ Specifies the feature number for Trunk Route Control
(724) [For Manager, Operator only].
˝ Specifies the feature number for UCD Supervisor
(725) mode.
˝ Specifies the feature number for making a TIE line call.
(77)
Description/Function Reference
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
Tie Lines
(F/G)