Tenant - Panasonic KX-TD500 Installation Manual

4.2.1 Tenant

Used to assign various parameters on a tenant (1 - 8) basis.
Value Range
Parameter
(default)
Tenant No.
DAY/NIGHT 1. Manual
Switching Mode 2. Auto
(Manual)
Inter-tenant 1. No check
Calling (1 - 8) [Disallowed]
2. Check
[Allowed]
(No check)
1-8 Specifies the tenant number which you are going to
(1) program.
Specifies the Day/Night switching mode, Manual or
Auto.
1. Manual
The Manager or an Operator can switch Day/Night
mode at any time desired by dialing the feature
number for "Night Mode set/cancel."
2. Auto
The system automatically switches the Day/Night
mode each day at the time programmed in Auto Start
Time.
Specifies other tenant numbers to which extensions in
this tenant can make a call.
If no tenant numbers are checked in this field, extension
users within this tenant cannot make a call to extensions
in other tenants.
Making calls from one tenant to another is not allowed
by default.
Description/Function
System Programming
Reference
Tenant Service
(F/G)
Night Service
(F/G)
None
4-21