Panasonic KX-TD500 Installation Manual page 255

4.10.4 System Parameters 4.10.4 System Parameters
Value Range
Parameter
(default)
Remote FDN Up to 4 digits
consisting of 0-9
Password
System
programming of alphanumeric
characters
PITS
Programming consisting of 0-9
Walking COS
consisting of 0-9
Serial Interface Port
PROG (Port 1)
Parity 1. None
2. Mark
3. Space
4. Even
5. Odd
NL (New Line) 1. CR+LF
Code 2. CR
(CR + LF)
Baud Rate 1. 2,400 b.p.s
(Modem Speed) 2. 4,800 b.p.s
3. 9,600 b.p.s
4. 19,200 b.p.s
Word Length 1. 7 bits
2. 8 bits
4-116 System Programming
Specifies the FDN (Floating Directory Number) for
Remote Administration.
(Blank)
4 digits Specifies the password required for entering System
Programming mode and Maintenance from a Personal
Computer.
(1234)
4 digits Specifies the password required for entering the User
Programming mode.
(1234)
4 digits Specifies the 4-digit password for Walking COS
feature.
(1234)
A parity code indicates what type of parity is used to
detect an error in the string of bits composing a
character. Make an appropriate selection depending on
the requirements of your printer or personal computer.
(None) [Note]
• Port 1 is fixed to"None."
Specifies the NL Code for your printer or personal
computer. If your printer or personal computer
automatically feeds lines with a carriage return, select
"CR (Carriage Return)."
If not, select "CR+LF (Line Feed)."
Specifies the data transmission speed from the system
to the printer or personal computer.
(9,600)
Defines the number of bits in each byte or character.
(8) [Note]
• Port 1 is fixed to 8 bits.
Description/Function Reference