Table 6-6: Signal Analysis And Monitoring Characteristics - Tektronix H600 RFHawk Service Manual

Specifications
6–8

Table 6-6: Signal analysis and monitoring characteristics

Characteristic Description
AM Provides an audio output signal after AM demodulation of the
Demodulation user-selected signal
Measurement As previously selected
Frequency
Minimum -100 dBm
Input Signal
Level,
Typical
Audio 8 kHz
Measurement
Bandwidth
FM Provides an audio output signal after FM demodulation of the
Demodulation user-selected signal
Measurement As previously selected
Frequency
Minimum -100 dBm
Signal Level,
Typical
Maximum Up to 100 kHz
Signal
Deviation
Audio 8 kHz, 15 kHz, 75 kHz, or 200 kHz
Measurement
Bandwidth
Maximum 15 kHz
Audio Output
Bandwidth
Provides both an audio tone and a visual display that are related to the
Signal Strength
strength of the user selected signal
Indicator
Input Signal -120 dBm, minimum
Level
Measurement As previously selected
Frequency
Measurement Up to 20 MHz, dependent upon span and RBW setting
Bandwidth
Tone Type Variable beep rate or variable frequency
Update Rate, 10 per second
Typical
H600 & SA2600 Service Manual