Table of Contents
Advertisement
Troubleshooting
H600 & SA2600 Service Manual
WARNING.
Before doing this or any other procedure in this manual, read
the Safety Summary found at the beginning of this manual. Also, to prevent
possible injury to service personnel or damage to the instrument components,
read Installation in the product user manual, available on the Web at
www.tektronix.com, and Preventing ESD in this document.(See page 4-3.)
This section contains information and procedures designed to help you isolate
faulty modules in the H600 RFHawk or SA2600 Spectrum Analyzer.
This section assumes that service personnel have the prerequisite skills required to
work on this instrument. Details of instrument operation are not in this manual.
The following diagram shows the processor and backlight inverter board
connections. Use this diagram while doing the troubleshooting steps in this
section.
Figure 4-1: Processor and backlight inverter board input and output connections
Troubleshooting
4–13
Advertisement
Table of Contents
