Additional Items Required - Seagull Models EDGE 540 EP Assembly Manual

EDGE 540.
INTRODUCTION.
Thank you for choosing the EDGE 540 ARTF by SEAGULL EP. The EDGE 540 was designed
with the intermediate/advanced sport flyer in mind. It is a semi scale airplane which is easy to fly
and quick to assemble. The airframe is conventionally built using balsa, plywood to make it stronger
than the average ARTF , yet the design allows the aeroplane to be kept light. You will find that most
of the work has been done for you already.Flying the EDGE 540is simply a joy.
This instruction manual is designed to help you build a great flying aeroplane. Please read this
manual thoroughly before starting assembly of your EDGE 540. Use the parts listing below to identify
all parts.
WARNING.
Please be aware that this aeroplane is not a toy and if assembled or used incorrectly it is
capable of causing injury to people or property. WHEN YOU FLY THIS AEROPLANE YOU
ASSUME ALL RISK & RESPONSIBILITY.
If you are inexperienced with basic R/C flight we strongly recommend you contact your R/C
supplier and join your local R/C Model Flying Club. R/C Model Flying Clubs offer a variety of training
procedures designed to help the new pilot on his way to successful R/C flight. They will also be able
to advise on any insurance and safety regulations that may apply.

ADDITIONAL ITEMS REQUIRED.

EP Motor.
EP MOTOR.
Speed control: 45A to 50A
Speed control: 45 to 50amp.
2
Instruction Manual.
Battery: Power battery 3 cells
2200 mAh - 3200mAh
Radio :4 channel with 5 digital servos
(medium size).