Your Receiver; Pin-Code Default: 1234; Side Panel; Remote Control - THOMSON THT82 User Manual

- It is advised not to store important information on USB storage devices used with the receiver.
Always make backups of data on your USB storage device before using it with this receiver.
Thomson will not take responsibility for any loss of information or circumstances caused by loss of
information.
- Please ensure that either the USB device is already formatted to NTFS or FAT32 or format the USB
device via your receiver. Formatting requires entering the PIN code (default 1234)
- Thomson cannot guarantee the playback of all files although extensions are listed, as it depends on
file size, codec, bit rate and resolution.

2.0 YOUR RECEIVER

2.1 PIN-CODE DEFAULT: 1234

2.2 Side Panel

1. TV (HDMI)
2. Micro USB:
3. IR extender
4. Antenna:

2.3 Remote Control

1. q
2. INFO
3. SLEEP
4. !
5. AUDIO
6. SUB
7. PG+/PG-
8. EPG
9. TEXT
10. MENU
11. EXIT
12. pq
13. t u
14. OK
15. GOTO
16. FAV
17. TV/R
18. RECALL
19. 0~9
20. 4
21. u
22. 2/TIMESHIFT
23. 5 6
24. 7 8
25. COLOURED BUTTONS For Editing in menu, Multimedia and Teletext functions.
26. ZOOM
To connect your receiver with your TV set using an HDMI extension
cable or directly.
Connector for USB devices and power from TV USB.
Point your remote control towards this sensor.
To connect to your antenna for the reception of broadcast signal,
using the IEC adapter.
Turns the receiver On/Standby
Shows the actual channel information
Press SLEEP repeatedly to select an automatic switch off time
Mutes audio output of the receiver
Sets the current audio channel to left, right or stereo
Shows list of subtitled languages
Page up/down and 10 channels steps in channel list mode
Shows the EPG (Electronic Programme Guide) in TV mode
Shows Teletext on OSD (On Screen Display)
Opens the main menu. In menu you will get one step back
Exits from the menu or sub-menu
Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specific Menus
Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
While in playback, select a time to jump to.
Favourite group selection
Toggles between TV or RADIO mode
Back to previous shown channel, in menu, one step back.
Channel selection or value input
Records the TV programme to the connected storage device
Start playback in Multimedia, Start Playback of Timeshift
Activates the Timeshift function
Fast rewind/Fast forward
Previous/Next item in Multimedia.
Follow on screen suggestions.
Combined on coloured buttons:
Zoom in Multimedia Picture show.
Fig. 1
Fig. 2
5