Location Of The Boiler - REMEHA Gas 310 ECO PRO-285 Installation, User And Service Manual

Gas 310 ECO PRO - Gas 610 ECO PRO
I
L
55
55
531
160514 - 125467-05
I
R
T003785-C
663 21,5
55
55
87,5
T003474-B
4.3.2.

Location of the boiler

n Boiler type Gas 310 ECO PRO
Left version
L
Right version
R
Inspection hatch (Service side)
I
The service side with the inspection hatch on the heat exchanger is
considered to be the front of the boiler. The boiler is available in both
a 'left-hand' and 'right-hand' version. This means that the hydraulic
connections and the flue gas discharge are situated on either the left
or the right-hand side of the boiler. The control panel is on the front
as standard, but can easily be rotated so that it is on the short side.
To make the boiler level and to raise the wheels off the floor, the
adjustment bolts must be used. Turn the adjustment bolts out as soon
as the boiler is placed in the correct position. The picture shows the
support surface of the boiler (This is the position of the adjustment
bolts).
Boiler type
A (mm)
Gas 310 ECO PRO
285
355 723
430
500
575 1032
650
4. Installation
21