Installation Options; Transport - REMEHA Gas 310 ECO PRO-285 Installation, User And Service Manual

4. Installation
4.3

Installation options

L
L
1000
1000
20
4.3.1.
Boiler type
Gas 310 ECO PRO
1789
800
The boiler is supplied fully assembled on a pallet. See the diagram
T003980-C
and table for the dimensions. The base of the packaging is a pallet
80 cm wide. This means that the crate can be transported with a pallet
truck or four-wheel transport boards. Without the packaging, the
boiler is 720 mm wide (700 mm without casing) and the boiler will fit
through standard doors. The boiler has integrated wheels, so that it
can easily be moved around once the packaging has been
removed.
If required for internal transport, the boiler can be dismantled into
smaller parts for transport. The boiler can be stripped of:
4 Casing components
4 Gas/air components
4 The frame section on the instrument panel side
See the diagram and table for the dimensions of the largest remaining
1107
transport part (Frame section with heat exchanger and water
connections).
Boiler type
700
Gas 310 ECO PRO
T003676-B
¼For information on fitting the parts, refer to the assembly
instructions delivered with the boiler.

Transport

For Gas 610 ECO PRO boilers: The features and
instructions described are for each boiler module.
L (mm)
285
355 1920
430
500
575 2230
650
CAUTION
The wheels are designed for transport purposes only and
not for use when the boiler is in its final position.
Weight (kg) L (mm)
285 249
355 283
430 317
500 356
575 390
650 424
Gas 310 ECO PRO - Gas 610 ECO PRO
1160
1469
160514 - 125467-05