Installing The Boiler; Boiler Location - REMEHA P 520 Installation And Service Manual

3 Installing the boiler

3.1 Boiler location

For the assembly and because of their design, P 520 boilers require
no special base. Their closed furnace system means that the floor
need not have refractory properties. All you have to ensure is that the
floor can support the weight of the boiler when it is fitted for operation.
If the boiler location is not determined precisely, leave enough space
around the boiler to facilitate monitoring and maintenance
operations.
Boiler body *
Straight connection (not supplied) *
* 1) In order to facilitate subsequent work on the boiler(replacing the
water distributing tube etc.) use a flanged connection from the boiler
to the system, making sure you comply with minimum clearance
dimension D.
Angled connection (not supplied)
Air inlet
Air outlet
P 520-13
L 1955
M 275
C min. 300
D min. -
14/06/2012 - 300016859-001-01
P 520-15 P 520-17
2245 2445
324 321
436 656
136 356
P 520
If A = 1.2 m (door opening side), A' = 0.5 m
If A = 0.5 m, A' = 1.2 m (door opening side): adapt the dimensions
on the basis of the dimensions of the burner when the door is open.
B = 1.5 m: adapt the dimensions on the basis of the dimensions of
the burner.
P 520-19 P 520-21
2645 2955
299 324
656 936
356 636
P 520-23 P 520-25
3155 3355
324 303
1266 1266
966 966
9