Cleaning The Burner; Clean The Burner Area - REMEHA Gas 310 ECO PRO-285 Installation, User And Service Manual

7. Checking and maintenance
3
2-5 bar
min. 1cm
1
70
1
2
4
T003488-F
2
T005044-A
7.3.5.

Cleaning the burner

1. Unscrew the nuts from the adapter: Remove the adapter.
2. Lift the burner out of the heat exchanger.
3. Check the burner and, if necessary, clean without touching it (e.g.
with compressed air between 2 and 5 bars: respect a minimum
distance of 1 cm from the surface of the burner).
Never clean the burner's surface with a brush or similar
item.
4. Carefully hoover the dirt from the inside of the burner.
5. Replace the burner if faulty or seriously damaged.
CAUTION
Do not refit the burner until the burner area, heat
exchanger, condensate collector and siphon have been
cleaned.
7.3.6.

Clean the burner area

1. Perform a visual check of the burner area.
2. Remove visible pollution with a vacuum cleaner.
Gas 310 ECO PRO - Gas 610 ECO PRO
160514 - 125467-05