Tools Needed For Installation; Parts List Images - SSV Works Polaris RZR XP 1000 Installation Manual

WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in
material or workmanship. All SSV Works Electronics are covered by a limited 1 year warranty
against defects in material or workmanship. All Kicker Speakers are covered by a limited 1
year warranty against defects in material or workmanship. All Kicker Amplifiers are covered by
a limited 2 year warranty against defects in material or workmanship. Labor for replacement
of defective components is not covered. Contact SSV Works for further warranty information.

TOOLS NEEDED FOR INSTALLATION

- T30 & T40 Torx Socket
- 10mm and 5.5mm Socket
& Rachet or Wrench

PARTS LIST IMAGES

1. Amp Power Wire
5. Direct-fit Amp Plate with pre-
tuned Amp(s) and MRB3 Brain
9. Fuse Holder with 40A Fuse
- 4mm & 5mm Allen Wrench
- #2 & #3 Phillips Screwdriver
2. Front B-H1149 Speaker Wire
6. M6 x 1.0 Screws x 1
10. Battery Terminal Cable
!
- Drill with 1/8", 1/4" & 1/2"
Drill bits
- Panel removal tool
3. Rear B-H1151 Speaker
Expansion
7. M6 Washer x 1
RZ3-5K
Polaris RZR XP 1000 & 900
Kicker 5 Speaker Audio Kit
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
- Wire Crimpers - Scribe or Marker
- Wire Strippers - Utility Knife
4. MRB3 Power & Ground
Connector
8. Zip Ties x 5
3