SSV Works WP-WC2O4 Installation Manual

SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in material
or workmanship. All SSV Works Electronics are covered by a limited 1 year warranty against
defects in material or workmanship. All SSV Works Speakers are covered by a limited 1 year
warranty against defects in material or workmanship. Labor for replacement of defective
components is not covered. Contact SSV Works for further warranty information.
TOOLS NEEDED FOR INSTALLATION
- Wire Crimpers
- Wire Strippers
PARTS LIST IMAGES
1. WP-WC204
5. Mounting Brackets x 2
INSTALLATION NOTES
To make wiring easier, locate the battery in the vehicle before beginning the installation. The use of a thread locker is recommended on all screws
to prevent loosening due to vibration.
- Wrench for Battery Terminal
- #3 Phillips Screwdriver
2. M6 x 1.0 Screws x 16
6. Fuse Holder with Fuse
Arctic Cat Wildcat Trail / Sport
Please read and understand these
!
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
PARTS LIST
1. WP-WC204 x 1
2. M6 x 1.0 Screws x 16
3. M6 Washers x 16
4. Straight Mounting
Brackets x 2
3. M6 Washers x 16
7. Crimp on ring terminal
WP-WC2O4
4 Speaker Overhead
5. Curved Mounting
Brackets x 2
6. Fuse Holder with Fuse
7. Crimp on ring terminal
8. Zip Ties
4. Mounting Brackets x 2
8. Zip Ties