SSV Works Polaris RZR XP 1000 Installation Manual page 13

WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in
material or workmanship. All SSV Works Electronics are covered by a limited 1 year warranty
against defects in material or workmanship. All Kicker Speakers are covered by a limited 1
year warranty against defects in material or workmanship. All Kicker Amplifi ers are covered by
a limited 2 year warranty against defects in material or workmanship. Labor for replacement
of defective components is not covered. Contact SSV Works for further warranty information.
TOOLS NEEDED FOR INSTALLATION
- Wire Crimpers
- Wire Strippers
- T-30 Torx Driver
- Drill with 1/8", 1/4" and
1/2" Drill bit
PARTS LIST IMAGES
1. RZ3-F65K Enclosures
(1 pair)
Drill Point
RZ3-F65
2017 Polaris RZR Kick Pod, Cut Template
Driver Inside Template
Cut along parimeter
Drill Point
4. Driver Side Inside Template
- #2 Phillips Screwdriver
- Scribe or Marker
- Utility Knife
2. M6 x 16mm Screws x 6
RZ3-F65
2017 Polaris RZR Kick Pod, Cut Template
Driver Outside Template
Drill Point
Drill Point
Cut along parimeter
5. Driver Side Outside Template
RZR XP1000 & 2015+ RZR900
Please read and understand these
!
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
3. M6 Washers x 6
Drill Point RZ3-F65
2017 Polaris RZR Kick Pod, Cut Template
Passenger Inside Template
Cut along parimeter
Drill Point
6. Passenger Side Inside
Template
Kicker 6.5" Speaker
Front Kick Panels
RZ3-F65
2017 Polaris RZR Kick Pod, Cut Template
Passenger Outside Template
Drill Point
Drill Point
Cut along parimeter
7. Passenger Side
Outside Template
13