Parts List; Tools Needed For Installation; Installation Notes - SSV Works X32-PHZ2A Manual

SSV WORKS, 4610 Calle Quetzal, Camarillo, CA 93012
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in
material or workmanship. All SSV Works Electronics are covered by a limited 1 year warranty
against defects in material or workmanship. Labor for replacement of defective components
is not covered. Contact SSV Works for further warranty information.

TOOLS NEEDED FOR INSTALLATION

- T25, T30, T40 torx driver
PARTS LIST IMAGES
JVC MR1 Headunit
MR1 dash screws x2

INSTALLATION NOTES

Always disconnect the battery. For instructions regarding the headunit, refer to the JVC manual.
2
- #2 phillips screwdriver
MR1 Trim Ring
M6 x 1.0 Screws, Nuts &
Washers x4 (T-30 torx)
JVC MR1 to SSV Adapter
- air saw and safety equipment
DMR1 Dash Kit x1
Push Pins x2
Harness (B-H2368)

PARTS LIST

Please read and understand these
!
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
- Drill and 1/8" and 1/4" drill bit
DMR1 Base Plate x1
Drill Guides x4
Dash Kit