Tools Needed For Installation - SSV Works RZ4-2KRC Manual

llll:IRK&
SSVW0RKS, 201 N. Rice Ave
Unit
A, Oxnard, CA 93030
www.SSVworks.com
I
Phone:
818-991-1778
I
Fax: 866-293-6751
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects In
material or workmanship. All SSVWorks Bectronlcs are covered by a limited 1 year warranty
against defects In material or workmanship. All Kicker Speakers are covered by a limited 1
year warranty against defects In material or workmanship. All Kicker Amplifiers are covered by
a limited 2 year warranty
against
defects In material or workmanship. Labor for replacement
of defective components Is not covered. Contact SSV Works for further warranty Information.
TOOLS NEEDED FOR INSTALLATION
-Wire Crimpers
-Wire Strippers
-T-30 Tone Driver
-Drill with 1/8", 1/4" and
1/2" Drill bit
PARTS LIST IMAGES
1. RZ3-F65K Enclosures
(1 pair)
- #2 Phillips Screwdriver
- Scribe or Marker
- Utility Knife
2. M6
x 16mm Screws x 6
3. M6
Washers x 6
4. Driver Side Inside Template
5. Driver Side Outside Template 6. Passenger Side Inside
Template
Polaris RZR XP Turbo S
Kicker 6.5" Speaker
Front Kick Panels
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
7. Passenger Side
Outside Template
7