Parts List; Tools Needed For Installation - SSV Works KX-Q3A2 Manual

SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in
material or workmanship. All SSV Works Electronics are covered by a limited 1 year warranty
against defects in material or workmanship. All SSV Works Speakers are covered by a
limited 1 year warranty against defects in material or workmanship. Labor for replacement of
defective components is not covered. Contact SSV Works for further warranty information.

TOOLS NEEDED FOR INSTALLATION

- T30 torx
- 10mm wrench or ratchet
- 13mm wrench or ratchet
PARTS LIST IMAGES
1. Amp Power Wire x2
5. M6 Flange Hex Head Bolt
9. Zip Ties x 5
2
- 18 mm socket with extention
- Wire crimpers
- Panel removal tool
2. B-H1909 Front
Speaker Harness
6. M6 x 16mm Screw x 2
10. Fuse Holder with 40A Fuse x2
- #2 screw driver
- #3 screw driver
3. MRB3 Power & Ground
Connector
7. M6 Washer x 3
11. Battery Terminal Cable x2

PARTS LIST 1/3

Wiring Installation
Please read and understand these
!
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
4. Amp Tray with pre-loaded
PhaseEQ Amp
8. M6 Locking Hex Nut