SSV Works Polaris RZR XP 1000 Installation Manual page 16

E. Drill a pilot hole at the places just marked with a 1/8" drill bit. Then follow up by using a 1/4" drill bit for both pilot holes (for mounting the pod).
F. Route the speaker cable attached to the pod through the inside
footwell 1/2" hole made in Step D.
H. With the provided M6 screws and washers, loosely mount the pod through the 3 holes previously drilled. Once all screws have been
inserted into the pod, hand tighten all 3 screws.
I. Connect the B-H1149 cable to the speaker pods and zip tie all
cables to the frame
E1
F
G. Position the speaker pod in place and line up with drilled
mounting holes
H
I
J. Connect the speaker harness to the amplifi er
E2
G
H
J
16