Configuration in 2 stages with extended extension cable
Another
equipment
Layout in enclosure
The PLC components can be laid out in one stage or in two stages, upper and lower. The connecting procedures in each case
are explained below.
Keep a space of at least 50 mm between the module main body or other devices and structure.
Also, separate the PLC from high-voltage lines, high-voltage devices, and power devices when possible. Failure to do so may
cause fire, equipment failures or malfunctions.
Configuration in 1-stage layout
Expansion
adapter
FX5UC
A
CPU
module
For product dimensions or manual for
various products, refer to Appendix
4. I/O Module.
Configuration in 2-stage layout
For product dimensions or manual for various products,
refer to App 4 I/O Module.
FX5UC
CPU module
Expansion
adapters
Extended
extension cable
•
FX5-30EC(30cm)
•
FX5-65EC(65cm)
5 INSTALLATION
76
5.1 Installation Location
FX5UC CPU
module
Powered
input/output
module
Extension module
Connector
conversion
module
Extension module
Powered
input/output
module
For product dimensions or manual for various
products, refer to App 4 I/O Module.
Extended
extension cable
• FX5-30EC
• FX5-65EC
≥50mm
A
50 mm
A
Intelligent
module
Intelligent
module
≥50mm