Mitsubishi Electric FX5UC-96MT/D User Manual page 96

Wire end treatment
Crimp terminal size differs depending on terminal screw size and wiring methods used.
• Use crimp terminals of the following sizes.
■M3 terminal screw
• When a single wire is connected to a single terminal
φ3.2
6.2 mm
or less
φ3.2
6.2 mm
or less
<Reference>
Terminal manufacturer
JST Mfg. Co., Ltd.
• When two wires are connected to a single terminal
φ3.2
6.2 mm
or less
φ3.2
6.2 mm
or less
<Reference>
Terminal manufacturer
JST Mfg. Co., Ltd.
*1 To adapt the LVD directive (EN61010-2-201:2013) of the EC directive, avoid the wiring with two wires to the built-in terminal, and take an
appropriate action such as adding an external terminal.
For the time of compliance with the LVD directive (EN61010-2-201:2013), refer to Page 151 Requirement for Compliance with LVD
directive.
■M3.5 terminal screw
• When a single wire is connected to a single terminal
3.7
6.8 mm
or less
3.7
6.8 mm
or less
• When two wires are connected to a single terminal
3.7
6.8 mm
or less
6.0 mm
or more
3.7
6.8 mm
or less
6.0 mm
or more
6 WIRING
94
6.2 Cable Connecting Procedure
Terminal screw Crimp terminal
Terminal
Type No.
FV1.25-B3A
FV2-MS3
Terminal screw Crimp terminal
6.3 mm
or more
Terminal
6.3 mm
or more
Type No.
FV1.25-B3A
Terminal screw Crimp terminal
Terminal
Terminal screw
Terminal
Applicable cable Certification
AWG22 to 16 UL Listed
AWG16 to 14
*1
Applicable cable Certification
AWG22 to 16 UL Listed
Crimp terminal
Pressure bonding tool
YA-1
(JST Mfg. Co., Ltd.)
Pressure bonding tool
YA-1
(JST Mfg. Co., Ltd.)