Procedures For Installing Directly (With M4 Screws); Hole Pitches For Direct Mounting - Mitsubishi Electric FX5UC-96MT/D User Manual

5.4

Procedures for Installing Directly (with M4 Screws)

The product can be installed directly in the enclosure (with screws).
Position the holes so that there is a gap of about 2 mm between the products.

Hole pitches for direct mounting

The product mounting hole pitches are shown below.
For pitch that varies depending on the product, refer to the table.
I/O module
Dimensions
20 20
A
5 W
B
Bus conversion module
Dimensions
8 8
C
Intelligent function module
For the mounting hole dimensions of intelligent function modules, refer to user's manuals of each product.
5 INSTALLATION
80
5.4 Procedures for Installing Directly (with M4 Screws)
Model name
FX5-8EX/ES
FX5-8EYR/ES
FX5-8EYT/ES
FX5-8EYT/ESS
FX5-16EX/ES
FX5-16EYR/ES
FX5-16EYT/ES
FX5-16EYT/ESS
FX5-16ER/ES
FX5-16ET/ES
FX5-16ET/ESS
FX5-16ET/ES-H
FX5-16ET/ESS-H
FX5-32ER/DS
5
FX5-32ET/DS
FX5-32ET/DSS
Model name
FX5-CNV-BUS
Mounting hole pitch W
Unit: mm
Refer to the figure shown to the left.
140
Mounting hole pitch W
Unit: mm
Refer to the figure shown to the left.