Configuration in 2 stages with extended extension cable
A
FX5UJ
CPU module
Powered
input/output
module
A
A
Another
equipment
Layout in enclosure
The PLC components can be laid out in one stage or in two stages, upper and lower. The connecting procedures in each case
are explained below.
Keep a space of at least 50 mm between the module main body or other devices and structure.
Also, separate the PLC from high-voltage lines, high-voltage devices, and power devices when possible. Failure to do so may
cause fire, equipment failures or malfunctions.
Configuration in 1-stage layout
Expansion
adapter
A
FX5UJ
CPU module
For product dimensions or manual for various
products, refer to App 3 I/O Module.
Configuration in 2-stage layout
For product dimensions or manual for various
products, refer to App 3 I/O Module.
FX5UJ
CPU module
Expansion
adapters
Powered
input/output
Extended
module
extension cable
• FX5-30EC (30cm)
• FX5-65EC (65cm)
For product dimensions or manual for various
products, refer to App 3 I/O Module.
*1 Including FX5-1PSU-5V
A
A
Extended
A
extension cable
FX5-30EC
•
FX5-65EC
•
A
A
50mm
Extension module
Intelligent
function module
Intelligent
module
Extension module
Intelligent
module
*1
A
A
≥50 mm
50mm
5 INSTALLATION
63
5.1 Installation Location
5