Table of Contents
Advertisement
this product to encourage you to recycle wherever possible.
Please be environmentally responsible and recycle this product through your recycling
facility at its end of life. Do not dispose of this product as unsorted municipal waste. Follow
local municipal waste ordinances for proper disposal provisions to reduce the
environmental impact of waste electrical and electronic equipment (WEEE).
For information regarding the disposal of this equipment, go to http://www.VertivCo.eu.
ROHS Compliance
The MPH2™ Rack PDU modules comply with the Restriction of Hazardous Substances
directive (ROHS), prohibiting use of six hazardous materials manufacturing of electronics, including lead-
free solder.
FCC Compliance
This unit complies with the limits for a Class A device pursuant to Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15, Subpart B of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case
the user will be required to correct the interference at his own expense.
Vertiv | Vertiv™ MPH2 Rack PDU Installer/User Guide
3
Advertisement
Table of Contents
