Table of Contents
Advertisement
Table 2.6 Circuit Breaker Branch Identification
Descriptions
ITEM
DESCRIPTION
1
Low-profile circuit breaker actuator
2
Standard-profile circuit breaker actuator
3
Branch identification
2.8.6 Hard-wired connection features
A rack PDU can be equipped with either a factory-installed input power cord or hard-wired connections.
The hard-wired connection will be at one end of the unit. A terminal block in the hard-wired connection
compartment is coded to aid in making the connections. A collar secures the input wire, providing stain
relief for the terminal block connections. See
Vertiv | Vertiv™ MPH2 Rack PDU Installer/User Guide
Disassembly to install an input-power cable
on page 14.
11
Advertisement
Table of Contents
