Adjust The Orientation Of The On-Board Display; View Active Alarms; Silence An Audible Alarm - Vertiv MPH2 Installer/User Manual

Rack pdu

Hide thumbs Also See for MPH2:

Table of Contents

4. Use the arrow keys to highlight the up/down arrow, and press the Select key to increase or

decrease contrast.

5. When the contrast is satisfactory, highlight the Return to Previous Level icon, and press the

Select key to return to the system-information screen.

NOTE: These steps also apply to the RPC BDM.

4.3.6 Adjust the Orientation of the On-board display

Because mounting of the MPH2™ Rack PDU in the rack may vary, the on-board display may be "flipped" to

change the screen orientation for viewing ease.

Press any key to activate the display.

2. Use the arrow keys to highlight the Information icon, and press the Select key.

3. Use the arrow keys to highlight the Flip-orientation icon, and press the Select key to flip the

screen orientation.

4. Highlight the Return to Previous Level icon and press the Select key to return to the input-

level screen.

NOTE: These steps also apply to the RPC BDM.

NOTE: The most-recent alarms are at the top of the list.

Use the arrow keys to highlight the Alarm icon, and press the Select key to display a list of

active alarms on the MPH2 rack PDU.

2. Use the arrow keys to highlight the up/down arrow, and press the Select key to highlight an

alarm.

3. Highlight the Play button, and press the Select key to display the details of the specific alarm

alarm.

Figure 4.11 Alarm List Example

To silence an audible alarm, press any of the three navigation keys below the display.

See on page 41 for details about how the LED interface signifies events and alarms.

Vertiv | Vertiv™ MPH2 Rack PDU Installer/User Guide

Table of Contents