Table of Contents
Advertisement
4.3.3 Restore System Defaults
To restore system defaults:
1.
Use the arrow keys to highlight the Information icon and press the Select key.
2. Use an arrow key to highlight the Reboot/Restore-Defaults icon and press the Select key.
Figure 4.8 Restore Defaults Selected On Reboot Options
3. Use the arrow keys to highlight the Reboot/Restore-Defaults icon and press the Select key.
4. Use the arrow keys to highlight the up or down arrow on the bottom left and press the Select
key to highlight Restore Defaults.
5. At the confirmation screen, use the arrow keys to highlight the up or down arrow, and press the
Select key to highlight Yes/Restore Defaults, then press the Select key to restore the system
default settings.
Figure 4.9 Restore Defaults Confirmation
When the "Restore to Factory Defaults" command is initiated via the RPC2 module clients, the MPH2 rack
PDU settings are returned to the factory default values as well.
NOTE: For detailed information about settings and about network- and protocol-related default
settings for the RPC2 module, see the RPC2 Communications Module Installer/User Guide.
Vertiv | Vertiv™ MPH2 Rack PDU Installer/User Guide
29
Advertisement
Table of Contents
