Table of Contents
Advertisement
LEVEL
SETTINGS
SWOTP Delay
SWOTP Scope
Criticality
Locked/Unlocked
4.3.4 Determine IP Address, MAC Address and Firmware Version
1.
Use the arrow keys to highlight the Information icon and press the Select key.
2. Use the arrow key to highlight the Network icon and press the Select key to view the IP
address, MAC address, firmware, time and date.
Figure 4.10 IP address, MAC address and Firmware Information Example
NUMBER
1
IP address
2
MAC address
3
Agent firmware type and version
NOTE: The preceding illustration is an example of network information.
4.3.5 Adjust the Contrast of the On-board LCD
NOTE: Contrast adjustment may help improve display legibility in a high-temperature environment.
The on-board display is factory-set to be easily viewed in lighting conditions found in most work places,
however the contrast can be changed to suit user preference.
1.
Press any key to activate the display.
2. Use the arrow keys to highlight the Information icon, and press the Select key.
3. Use the arrow keys to highlight the Contrast icon, and press the Select key.
Vertiv | Vertiv™ MPH2 Rack PDU Installer/User Guide
DEFAULT
VALUE
10
Local
Critical
Unlocked
DESCRIPTION
MODELS
UNITS
NOTES
AFFECTED
Delay required for persistent over-temperature alarm
seconds
C,R
condition before SWOTP triggered.
Local = affects only PDU connected to the temperature
sensor that triggered SWOTP.
—
C,R
Array = affects all PDUs regardless of temperature
sensor that triggered SWOTP.
Affects power control when a member of a receptacle
—
C,R
group.
Affects authorization to manage power control and
—
C,R
behavior of SWOCP.
31
Advertisement
Table of Contents
