Wrapping The Bale - Welger RP 202 CLASSIC Operating Manual

9.2.1. Wrapping the bale

Repeatedly depress the button <AUTO/MAN> on the control
panel until the desired wrapping type is selected. The following
sequence appears:
fig. 74
Set to: manual wrapping (twine and net possible)
Set to: automatic twine wrapping
Set to: automatic net wrapping
Set to: automatic combined wrapping
Set to: manual wrapping (start setting)
The selected setting is stored and will be used again
automatically when the electronics are switched on.
The following two pages show the relevant operating steps and
the associated display on the control panel for each type of
wrapping:
54 WELGER RP 202 • RP 220 • RP 302 • RP 320