Welger RP 202 CLASSIC Operating Manual page 24

RP 202 CLASSIC
1725-159
3
4 5 6
fig. 14
20
Important: Depending on the equipment configuration, a rigid
or rotatable drawbar eye can be fitted. (observe local
regulations!) The drawbar eye [3] can be rotated about its
longitudinal axis, but has to be locked for a open-type hitch
attachment
1
drawbar eye [3] from turning by fitting parts 4, 5 and 6.
For tow hitch (low hitch) attachment, do not prevent drawbar eye
2
[3] from moving, i.e., parts 4 - 6 not be fitted. Parts 4 – 6 are
included loose with the delivery of balers having rotating
drawbar eyes.
The horizontal protective bracket underneath the drawbar must
be set for a minimum ground clearance of 50 cm.
Note: All fastening screws and nuts must be done up tightly:
Component
Bracket
RP 202 CLASSIC
Bracket
RP 202 SPECIAL
RP 220
RP 302
RP 320
Drawbar eye
Table 2: Tension moment
For open-type hitch (high hitch) attachment, prevent
see...
fig. 12
fig. 13
fig. 14, item 1
WELGER RP 202 • RP 220 • RP 302 • RP 320
Tension
moment
450 Nm
450 Nm
400 Nm