Warning: The common protection for the cutter blades has been disabled by pressing the button
Finally, the blades must definitely be once again moved completely in and out without having to depress the
cutting device button
36
Remedy:
1. Keep the button
2. Activate the control valve for at least 3-4 seconds.
3. Repeat points 1 and 2 as needed until the blades are in the
cutting position.
. Otherwise, the machine overload will result in a cancellation of the warranty!
depressed, while at the same time:
WELGER RP 202 • RP 220 • RP 302 • RP 320
!