Warning Symbols - Welger RP 202 CLASSIC Operating Manual

Warning symbol
8

2.7. Warning symbols

2.7.1. Explanation of the symbols
Danger areas which cannot be made safe by design measures
are identified by yellow warning symbols. Since these are signs
without texts in most cases, their precise meaning is described
below.
The warning symbols must always be kept in a
recognizable state. If there are no warning symbols on your
baler or if they are damaged, replace them (see also Spare
parts list, Section F).
Description/Spare part No.
Read and adhere to the operating manual and safety notes
before starting up for the first time.
Spare part No.: 0388.11.00.00
Close protective guards before putting baler into operation!
Spare part No.: 0389.92.00.00
Never reach into the baler pick-up area as long as the tractor
engine is running with the pto shaft connected.
Spare part No.: 0389.94.00.00
Always switch off the engine and remove the ignition key
before starting any maintenance and repair work.
Spare part No.: 0388.25.00.00
WELGER RP 202 • RP 220 • RP 302 • RP 320