Configuration Of The Tow Hitch - Welger RP 202 CLASSIC Operating Manual

1246-154
fig. 15
Correspond- Catch opening dimensions
ing category
ISO 730-1
2
3
1) Various configurations for the tow hitch are permissible if the external radius r is complied with. (see fig. 11)
2) The upper part of the tow hitch can be dismantled to comply with dimension c.
Dimensions are in millimetres
Table 3: Dimensions, location and support load of the tow hitch
WELGER RP 202 • RP 220 • RP 302 • RP 320
d b
min.
+1
-0
33 60
33 70

4.1.3. Configuration of the tow hitch

If the baler is attached to the tractor tow hitch, compliance with
the following dimensions is necessary: (Table 3).
Tow hitches other than as shown in fig. 15 and Table 3
are not permitted! Danger of breakage!
Catch
opening
outer radius
r
1)
max.
70
80
Position
c l
2)
min. ±10
220 400
250 500
Vertical
support load
F
kg
1200
1500
21