Welger RP 202 CLASSIC Operating Manual page 37

7
1721-111
fig. 37
fig. 38
WELGER RP 202 • RP 220 • RP 302 • RP 320
5
6
• Guide the net from the roll around the upper deflection roller
• Place the beginning of the net over the sideways tensioner
• Turn the rubber roller manually until the net is caught. So
• Move the net tensioner [3] forward into its working position.
4
fig. 36
[4] and finally around the net tensioner [3].
[5] and then between the rubber roller [6] and steel roller [7].
that the net does not prematurely enter the roll chamber
during baling operation, the start of the net must not project
more than approx. 10 cm.
3
1
33