Setting The Twine Brake - Welger RP 202 CLASSIC Operating Manual

Basic set up
Twine A
(shown as continuous line )
Twine B
(shown as dashed line - - - - - - )
fig. 28
30

5.1.2. Setting the twine brake

Spring length at the twine brake (fig. 28)
BALERCONTROL E
(fig. 25)
39 mm
37 mm
The twines brakes [1] (fig. 25 and fig. 27) must hold the twines
as taut as possible for the twine to be tight around the bales.
Note:
The permitted thread tension is exceeded when the twine
breaks in the vicinity of the guide rollers [8] (fig. 27).
WELGER RP 202 • RP 220 • RP 302 • RP 320
BALERCONTROL III
(fig. 27)
33 mm
28 mm