Proper Use; Electromagnetic Compatibility (Emc) - Welger RP 202 CLASSIC Operating Manual

WELGER RP 202 • RP 220 • RP 302 • RP 320

2.9. Proper Use

•
The baler has been built exclusively for producing bales
compressed from agricultural straw material lying on the
ground (proper use). Usage beyond this does not constitute
proper use. The manufacturer is not liable for damage
resulting from improper use; the user alone bears the risk.
•
Proper use also includes compliance with the operating,
maintenance and servicing conditions specified by the
manufacturer.
•
The baler may only be used, maintained and repaired by
persons who are familiar with working with such machines and
who have been informed of the dangers.
•
The attachment of auxiliary equipment to the baler, other than
at the factory pre-set positions, is prohibited. Only auxiliary
units approved by the manufacturer may be used.
•
The relevant accident prevention regulations, regional safety
standards and other generally recognized safety regulations
are to be observed.
•
Unauthorized alterations and the installation of non-approved
parts and equipment on the baler exclude the manufacturer
from any liability or damage resulting from this.
•
Alteration of any of the safety relevant components invalidates
both the conformity declaration and the CE-symbol.

2.10. Electromagnetic compatibility (EMC)

The baler is equipped with electronic constituents and
component parts whose function can be influenced by
electromagnetic radiation
influences can generate hazards for persons if the following
safety precautions are not taken into account.
In the case of a supplementary installation of electrical and
electronic appliances and/or constituents in the baler with a
connection to the onboard system, the user has to verify
whether the installation causes disturbances to the electronics
of the vehicle or of other constituents.
In particular, it has to be taken into account that any additionally
installed electrical and electronic components comply with the
EMC Directive 89/336/EEC in the respective current version and
that they are CE labeled.
from other appliances. Such
11