Chain Lubrication (Oil Lubrication) - Welger RP 202 CLASSIC Operating Manual

fig. 94
78

12.11. Chain lubrication (oil lubrication)

The mechanical chain lubrication system supplies the drive
chains of the machine with oil.
• Check the oil level in the lubrication oil tank daily (visual
inspection). Never let the lubrication oil tank run completely
empty.
Warning!
Check oil level daily. Avoid complete emptying. Otherwise air
may enter the distribution system and the pump may possibly
reach its full capacity only after some time.
Oil type: see chapter „12.13. Lubrication chart".
If required: refill oil:
• Unscrew tank lid.
• Refill oil up to the Max mark.
• Screw down tank lid again.
• Check sieve in the lubrication oil tank for soiling or
blockage (visual inspection).
If necessary: clean tank sieve:
• Unscrew tank lid.
• Remove tank sieve.
• Thoroughly clean the tank sieve using exclusively benzine
or paraffin oil.
• Insert tank sieve and screw tank lid down again.
Subsequently:
•
Check oil level in oil tank.
Warning!
Never use for cleaning: Tri, Per, Methanol, Acetone or other
polar, organic solvents.
WELGER RP 202 • RP 220 • RP 302 • RP 320