Removing Memory Modules; Memory Support - Supermicro 5038K-i User Manual

5. Use two thumbs together to press the notches on both ends of the module
straight down into the slot until the module snaps into place.
6. Press the release tabs to the lock positions to secure the DIMM module into
the slot.

Removing Memory Modules

Reverse the steps above to remove the DIMM modules from the motherboard.

Memory Support

The K1SPE motherboard supports 384 GB (max) Registered (RDIMM) DDR4 (288-
pin) ECC memory of up to 2400 MHz memory in 6 slots. Populating these DIMM
modules with a pair of memory modules of the same type and same size will result
in interleaved memory, which will improve memory performance.
Processor & Memory Module Population Confi guration
For memory to work properly, follow the tables below for memory installation.
DIMMA1
Note: To optimize memory performance, please install all DIMM modules
on the motherboard.
Press both notches
straight down into the
memory slot.
Memory Modules
DIMMB1 DIMMC1
5-5
Chapter 5: Advanced Motherboard Setup
DIMMD1 DIMME1 DIMMF1