Supermicro 5038K-i User Manual page 73

Figure 6-5. Release Tabs for the Drive Tray
3. Push the drive tray toward the front of the chassis and out.
4. Slide the DVD drive into the chassis until it clicks into place.
Installing a Storage Device in the 5.25" Drive Tray
You can install a 3.5" drive, one or two 2.5" disk drives or solid state drives.
1. Open the chassis left side cover.
2. Locate and press the release tab (Figure 6-5) for the drive tray in which you
want to place the drive.
Figure 6-6. Storage Device Confi gurations for 5.25" Bays
Chapter 6: Advanced Chassis Setup
Optional Bracket
(MCP-220-00044-ON)
for Two 2.5" Drives
6-5
Release Tab
Release Tab