Supermicro 5038K-i User Manual page 96

5038K-i User's Manual
Memory Topology
This item displays the information of a DIMM module as detected by the AMI
BIOS. The following items will display:
•
Mc1.Ch0.Dimm0 (Memory Controller 1 Channel 0. DIMM Slot 0)
•
Mc1.Ch1.Dimm0 (Memory Controller 1 Channel 1. DIMM Slot 0)
•
Mc1.Ch2.Dimm0 (Memory Controller 1 Channel 2. DIMM Slot 0)
•
Mc0.Ch0.Dimm0 (Memory Controller 0 Channel 0. DIMM Slot 0)
•
Mc0.Ch1.Dimm0 (Memory Controller 0 Channel 1. DIMM Slot 0)
•
Mc0.Ch2.Dimm0 (Memory Controller 0 Channel 2. DIMM Slot 0)
Memory Thermal
Set Throttling Mode
Throttling improves reliability and reduces power consumption in the proces-
sor via automatic voltage control during processor idle states. The options are
Disabled, OLTT (Open Loop Thermal Throttling), CLTT (Closed Loop Thermal
Throttling), and. CLTT (Closed Loop Thermal Throttling) with PECI (Platform
Environment Control Interface) update.
Phase Shedding
Select Enabled to support DDR3 VR Static Phase Shedding. The options are
Disabled and Enabled.
Memory Power Savings Mode
Use this item to confi gure the chipset-related power saving mode. The options
are Disabled, Enabled and User Defi ned.
WEMHOT (Memory Hot) Throttling Mode
Use this item to confi gure the Memory Throttling mode when the memory
modules are hot. Memory Throttling improves reliability and reduces power
consumption in the processor via automatic voltage control during processor
idle states. The options are Disabled, Output-Only, Input-Only, and Input and
Output Enabled.
7-16