Removing Memory Modules - Supermicro 5130AD-T User Manual

4. Align the notches on both ends of the module against the receptive points on the ends
of the slot.
5. Use two thumbs together to press the notches on both ends of the module straight down
into the slot until the module snaps into place.
6. Press the release tabs to the lock positions to secure the DIMM module into the slot.

Removing Memory Modules

Reverse the steps above to remove the DIMM modules from the motherboard.
Caution: Exercise extreme caution when installing or removing memory modules to prevent
any possible damage to the DIMMs or slots.
Warning: In dual-CPU confi gurations, memory must be installed in the DIMM slots associated
with the installed CPUs.
Note: Visit the product page on the Supermicro website for possible updates to memory
support (www.supermicro.com).
Chapter 3: Maintenance and Component Installation
Notches
Release Tabs
Press both notches
straight down into
the memory slot.
25