Supermicro 5038K-i User Manual page 102

5038K-i User's Manual
RAID Option ROM UI Banner
Select Enabled use the RAID Option ROM User-Interface banner on a SATA
device specifi ed by the user for system boot. The options are Enabled and
Disabled.
IRRT (Intel Rapid Recovery Technology) on ESATA
Select Enabled to use Intel® Rapid Recovery Technology (IRRT) on an external
SATA device specifi ed by the user to enhance SATA RAID performance. The
options are Enabled and Disabled.
Smart Response Technology
Select Enabled to use Intel® Smart Response Technology to enhance SATA
RAID performance. The options are Enabled and Disabled.
RAID OROM Prompt Delay
Use this item to set the time delay value of the RAID OROM prompt used by a
SATA device specifi ed by the user. The options are 2 Seconds, 4 Seconds, 6
Seconds, and 8 Seconds.
SATA AHCI LPM (Link Power Management)
Select Enabled to support Link Power Management for the onboard SATA AHCI
connections. The options are Enabled and Disabled.
SATA AHCI ALPM (Aggressive Link Power Management)
When this item is set to Enabled, the SATA AHCI controller manages the power
usage of the SATA link. The controller will put the link to a low power state when
the I/O is inactive for an extended period of time, and the power state will return
to normal when the I/O becomes active. The options are Enabled and Disabled.
Alternate Device ID on RAID
Select Enabled to use an alternate device ID on a RAID device specifi ed by the
user. The options are Disabled and Enabled.
Load EFI Driver for RAID
Select Enabled to load the EFI driver in a RAID setting. The options are Disabled
and Enabled.
7-22